Parkinsonia control

Page last updated: Wednesday, 5 February 2020 - 8:59am

Please note: This content may be out of date and is currently under review.

Control methods for Parkinsonia (Parkinsonia aculeata) a declared pest in Western Australia.

REPORT THE PRESENCE OF THIS PEST BEFORE UNDERTAKING CONTROL

Information about this pest can be found on the Parkinsonia: declared pest page.

Chemical requirements

When using any agricultural chemicals please ensure that you always follow instructions on the label and any permit. Users of agricultural chemical products must always strictly comply with the directions on the label and the conditions of any permit. To view permits or product labels go to the Australian Pesticides and Veterinary Medicines Authority website.

Chemical control options

Chemical control options can be found below. For other methods of control please refer to the aquatic weed control page, the declared plant control handbook.

Recommended herbicides

When actively growing

  • Triclopyr 
  • Triclopyr + picloram
  • Access™
  • Velpar® L
  • Graslan

Moist soil if possible, subsurface treatment if dry

  • Velpar® L

Hebicide: Triclopyr (Group I) (various trade names: see APVMA link)

Active ingredient

600g/L triclopyr

Rates of dilution for spot spraying

1:60 in distillate

Amount of product/10L distillate

160mL in distillate

Rate of product/ha

Not recommended

Time of application

When actively growing

Remarks

  • Apply as basal-bark spray to mature trees
  • May need follow-up treatment
  • Mix only what can be used on day of spraying – agitate regularly

More information and other control methods

  • Grub individual plants
  • Trees greater than 5m in height should be treated by stem injection
  • A 755g/L formulation also available

Hebicide: Triclopyr + picloram (Group I) (various trade names: see APVMA link)

Active ingredient

300g/L triclopyr + 100g/L picloram

Amount of product/10L water

35mL

Rate of product/ha

Not recommended

Time of application

When actively growing

Time of application

To trees under 2m in height

Remarks

  • Add Uptake™ spraying oil @ 50mL/10L of water mix
  • Thoroughly wet foliage

More information and other control methods

  • Grub individual plants
  • Trees greater than 2m in height should be treated by stem injection
  • Poor control if trees under moisture stress

Hebicide: Access™ (Group I)

Active ingredient

240g/L triclopyr + 120g/L picloram

Rates of dilution for spot spraying

1:60 in distillate

Amount of product/10L distillate

160mL

Time of application

Plants up to stem diameter of 5cm

Remarks

  • Use low pressure spray (<200kPa) and liberally spray bark until run-off
  • Treat to height of 30cm above ground

More information and other control methods

Do not treat stems that are wet or have been burnt

Hebicide: Velpar® L (Group C)

Active ingredient

250g/L hexazinone

Rates of dilution for spot spraying

  • Apply neat with a 'spot gun' to soil at 4mL/spot
  • One spot for each metre of tree (bush) height up to 5m tall

Rate of product/ha

Not recommended

Time of application

  • Apply to moist soil if possible
  • Use sub-surface treatment if dry

Remarks

  • Needs rain to activate
  • Keep clear of desirable trees
  • Apply spots between stem and drip line
  • Clean 'spot gun' thoroughly after use

Hebicide: Velpar® L (Group C)

Active ingredient

250g/L hexazinone

Amount of product/10L water

35mL

Wetting agent dilution

1:400 BS-1000

Time of application

Trees under 2m tall

Remarks

  • Avoid spraying under dry conditions or when trees bearing pods
  • Apply to foliage

Hebicide: Graslan (Group C)

Active ingredient

200g/kg tebuthiuron

Rate of product/ha

10–15kg

Time of application

When actively growing

Remarks

  • Apply to moist soil at beginning of 'wet' season.
  • Plants need to be actively growing. May need follow-up treatment in the next season.
  • For spot treatment apply at 1–1.5g/m2. To help with even distribution mix chemical with dry sand and spread over area.

More information and other control methods

  • Do not apply granules within 100m of water courses
  • Do not apply to ground sloping more than 11 degrees
  • Follow directions on label regarding distribution of granules under the drip line of trees

 

Biological control options

Biological control agents have been released for Parkinsonia, including Parkinsonia loopers (Eueupithecia species).

Contact information

Pest and Disease Information Service (PaDIS)
+61 (0)8 9368 3080